3 Series E90 335xi (N54) SAL
Disconnect water hose (1).
Disconnect plug connection (4).
Release screws (5).
Installation:
Replace aluminium screws.
Tightening torque: 11 51 1AZ
.
Installation:
If the water pump is to be reused, it must be mechanically rotated
once (breakaway torque at impellers).
One water pump rotation will be sufficient.
Assemble engine.
Venting instructions must be observed without fail.
RA Removing and installing/replacing water pump (N54)
BMW AG - TIS
22.02.2013 09:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -