3 Series E90 335xi (N54) SAL
Release retainers (1) on fuel rail and place to one side.
Disconnect plug connection (2).
Note:
Do not detach fuel line.
Unscrew nuts (3).
Release screw (4).
Tightening torque: 11 61 1AZ
.
Raise intake air manifold.
Release screws (1).
Set down distributor housing (2) in engine compartment.
Cut cable tie (1).
Disconnect plug connection (2).
Installation:
Replace all seals (3).
Installation:
Replace all seals.
Assemble engine.
RA Removing and installing intake air manifold (N54)
BMW AG - TIS
22.02.2013 09:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
