3 Series E90 335xi (N54) SAL
12 31 020
Removing and installing or replacing
alternator (N54)
Necessary preliminary tasks:
•
Switch off ignition
•
Disconnect battery negative lead and cover
•
Remove charge-air duct
•
Remove alternator drive belt
Note:
In order to remove the alternator, it is necessary to remove the
A/C compressor.
In so doing:
-
Do not draw off A/C system refrigerant.
-
Do not detach refrigerant lines from compressor.
-
Do not remove compressor; instead, remove from bracket
only and place to one side.
Remove compressor from bracket.
Note:
For purposes of improved clarity, illustrations and description
show compressor removed.
Release bolts a few turns until bracket (1) is loose. Do not
remove bracket (1).
Tightening torque 64 52 5AZ
.
Unlock plug (1) and remove.
Remove protective cap and release nut underneath.
Tightening torque 12 42 1AZ
.
Disconnect line (2).
RA Removing and installing or replacing alternator (N54)
BMW AG - TIS
22.02.2013 10:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -