3 Series E90 335xi (N54) SAL
Important!
Risk of damage! to sealing rings.
Special tool 11 8 670 is essential.
Attach charge-air duct (1) with special tool
11 8 670 to
intercooler (2).
Installation:
Texts refer to and illustrations show the right side.
The procedure is identical for the left side.
Important!
Charge-air hoses with clamp fastenings must be installed dry
and free from grease!
If charge-air hoses with clamp fastenings are not installed dry
and free from grease, this may result in turbocharger failure!
Unfasten clip.
Tightening torque 13 71 6AZ
.
Detach front charge-air duct (1) from charge-air duct (2).
Feed out front charge-air duct (1) towards top and remove.
Installation:
Install charge-air hose (charge-air duct) dry and free from grease.
RA Replacing front charge-air duct (N54)
BMW AG - TIS
22.02.2013 10:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -