3 Series E90 335xi (N54) SAL
Cut exhaust pipes with special tool 00 2 210 and with standard
workshop equipment at marked points and deburr.
Installation:
Connect centre muffler to both exhaust pipes by means of clamps
and align.
Align clamps and tighten down.
Tightening torque 18 00 5AZ
.
Installation:
Connect centre muffler to both rear mufflers by means of clamps
and align.
Align clamps and tighten down.
Tightening torque 18 00 5AZ
.
Note:
Check exhaust system for leaks.
RA Removing and installing/replacing centre muffler (N54)
BMW AG - TIS
22.02.2013 11:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -