3 Series E90 335xi (N54) SAL
Necessary preliminary tasks:
•
Disconnect battery negative lead
•
Remove underbody protection with bracket at front and rear.
•
Remove complete exhaust system
•
Remove reinforcement plate
•
Remove heat shields
•
Remove front propeller shaft
•
Remove rear propeller shaft
•
Remove fan cowl
Release screws (1).
Tightening torque 24 00 2AZ
.
Release screws.
Remove heat shield (1).
Remove cables (1) from holder (3).
Release screws (2) and remove holder (3).
RA Removing and installing automatic transmission (6HP19Z) AWD
BMW AG - TIS
22.02.2013 12:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -