3 Series E90 335xi (N54) SAL
Release ear clamp (1).
Detach gaiter (2) from tie rod.
Installation:
Clean rack and check surface for damage (e.g. by corrosion).
Grease rack (refer to BMW Service Operating Fluids).
Clean tie rod and apply grease to taper.
Note:
This ensures that the gaiter is not rotated when the tie rod is
rotated.
After installation:
•
Perform chassis alignment check
•
Carry out steering angle sensor adjustment
RA Replacing gaiter for steering gear on left or right (AWD)
BMW AG - TIS
22.02.2013 14:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -