3 Series E90 335xi (N54) SAL
Release holder (2) on both sides.
Release screw (1) on both sides on lower section of microfilter
housing (3).
Feed out microfilter housing lower section (1) in direction of arrow
and remove.
Installation:
Make sure microfilter housing lower section (1) is correctly
seated.
Installation:
Seal (2) of microfilter housing lower section (1) must not be
damaged or missing.
RA Removing and installing/replacing microfilter housing (lower section)
BMW AG - TIS
23.02.2013 00:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -