3 Series E90 335xi (N54) SAL
Installation:
Replace sealing ring (1) and coat with oil.
Installation:
Align lock (2) on gear unit to release pin (3).
Fit gear unit (1) up to stop.
Important!
Fit retaining lug on retainer (1) as pictured.
Retainer (1) must snap firmly into correctly!
Fit special tool 72 0 010 onto retainer (1).
Set retainer (1) on gear unit (2) and snap into place with special
tool 72 0 010 in direction of arrow.
Installation:
Check protective cap (3) for damage and replace if necessary.
RA Replacing release unit for trailer tow hitch
BMW AG - TIS
23.02.2013 02:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -