3 Series E90 M3 (S65) SAL
Warning!
Danger of scalding!
Carry out all tasks only when wearing oil-resistant, heat-
resistant protective gloves incl. underarm protection, face
guard and protective apron.
Open screw plug (1) with socket and a long extension (2).
Tilt long extension (1) with socket and screw plug in direction of
arrow.
Catch and dispose of engine oil with suitable equipment.
Release oil drain plugs (1 and 2).
Installation:
Replace sealing ring.
Tightening torque: 11 13 1AZ
.
Pour in engine oil.
Park vehicle on a horizontal surface.
Start engine and run at idle until an engine oil temperature
≥
70
°
is
reached.
Press on-board computer button for longer than 3 seconds.
Determine the oil level again.
RA Engine oil service (S65)
BMW AG - TIS
22.02.2013 09:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
