3 Series E90 M3 (S65) SAL
11 12 112
Replacing both cylinder head gaskets (S65)
Special tools required:
•
11 4 470
Necessary preliminary tasks:
•
Remove left cylinder head.
•
Remove right cylinder head.
•
Check cylinder head for leaks.
Important!
Do not open screw plugs.
The screw plug must always be replaced if it is opened by
mistake.
Installation:
Make sure oil bore (1) is clean.
Note:
Picture shows S85.
Check dowel sleeves (1) for damage and correct installation
position.
Clean sealing faces with special tool 11 4 470 .
Do not use any metal-cutting tools.
RA Replacing both cylinder head gaskets (S65)
BMW AG - TIS
22.02.2013 10:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
