3 Series E90 M3 (S65) SAL
Installation:
Replace main bearing shells.
Apply a light coating of engine oil to bearing shells.
Lay crankshaft (1) with a second person helping in direction of
arrow into crankcase.
Note:
Weight of crankshaft approx. 22 kg.
Picture shows S85.
Insert seal (1).
Important!
Make sure oil bore is clean.
Important!
Adhere without fail to the specified sequence of bedplate bolt
connections.
Risk of damage to crankshaft.
Leaks at bedplate/crankcase.
Important!
There are no more dowel sleeves in the crankcase.
Do not use new bolts.
If new bolts are used, observe special tightening/torque
specifications.
Position bedplate on crankcase.
Position lower section diagonally on bearing seats (1 and 5)
using two fit bolts (1 and 2).
Join fit bolts (1 and 2) to 8 Nm .
RA Replacing crankshaft (S65)
BMW AG - TIS
22.02.2013 10:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
