3 Series E90 M3 (S65) SAL
Crankcase lower half:
Installation:
Bearing shell (2) is a guide bearing.
Pay attention to guide lugs on bearing shells (see arrow).
Remove all bearing shells without lubricant groove.
Observe bearing classification.
Clean sealing face (1) with special tool 11 4 470 .
Insert bearing shells (2) without lubricant groove.
Insert guide bearing (3) without lubricant groove on bearing seat
5.
Release screws (1).
Remove oil nozzle (2) towards top.
Bearing classification on bedplate bearing seat.
Observe colour allocation on crankshaft (1 to 5).
V= Violet.
G = Green.
Y = Yellow.
RA Replacing all crankshaft main bearings (S65)
BMW AG - TIS
22.02.2013 10:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
