3 Series E90 M3 (S65) SAL
Important!
CCW thread!
Release central bolts (1 and 2).
Installation:
Replace central bolts (1 and 2).
Installation:
If the hexagon socket screw is released or forgotten by mistake,
the gear teeth can be readjusted with special tool 11 5 370 .
Screw in knurled screw on special tool 11 5 370 until
gearwheel (1) lines up with bore (see arrow) on thread.
Failure to tension the exhaust VANOS gear (1) will result in
rattling noises at idle.
Note:
Picture shows (S85).
Installation:
Check O-ring (1) on VANOS gear, replace if necessary.
Important!
Replace central bolt of adjustment unit.
Central bolt must be fully screwed once (refer to Screw
fastening list).
RA Removing and installing/replacing right exhaust VANOS gear (S65)
BMW AG - TIS
22.02.2013 10:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -