3 Series E90 M3 (S65) SAL
Replacing gear wheels
Necessary preliminary tasks:
•
Remove vibration damper.
•
Remove radial shaft seal at front.
Mount special tool 11 6 254 on crankcase.
Secure special tool 11 6 252 with magnetic base to special tool
11 6 254 .
Note:
Special tool 11 6 254 can only be secured to the crankcase with
one screw.
Picture shows (S85).
Important!
The oil pump chain of the oil suction pump must be removed.
The chain tensioner must not exert any tension on the oil
suction pump.
Align special tool 11 6 251 with its measuring shaft (2) vertically
to gearwheel (1).
Turn oil suction pump gearwheel (1) to stop.
Set special tool 11 6 251 to zero.
Turn oil suction pump gearwheel (1) in direction of arrow to stop.
RA Removing and installing/replacing oil suction pump (S65)
BMW AG - TIS
22.02.2013 10:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
