3 Series E90 M3 (S65) SAL
Detach oil pipes (1 and 2) from oil pump.
Installation:
Replace sealing rings.
To facilitate fitting, apply a light coating of engine oil to sealing
rings.
Clean all sealing surfaces.
Slacken nut (1).
Installation:
If reusing the sprocket wheel, check dihedron for damage and if
necessary replace.
Replace microencapsulated nut (1).
Tightening torque:11 41 1AZ
.
Release screw (1).
Release screw (2).
Fold sliding rail (3) downwards.
Remove sprocket wheel (1) from shaft.
RA Removing and installing/replacing oil pump (S65)
BMW AG - TIS
22.02.2013 10:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
