3 Series E90 M3 (S65) SAL
11 42 020
Removing and installing, sealing/replacing
main flow oil filter (S65)
Important!
It is essential to adhere to the exact filling capacities specified.
Overfilling the engine with engine oil will result in engine
damage.
Recycling:
Catch and dispose of engine oil with suitable equipment.
Note national regulations.
Necessary preliminary tasks:
•
Remove fan cowl with electronic fan.
•
Remove front underbody protection.
•
Remove A/C system drive belt.
•
Remove water pump belt pulley.
•
Remove coolant hoses.
•
Remove vibration damper.
•
Release power steering pump and lay to one side (do not
open pressure lines).
Release oil filter cover (1).
Installation:
Replace sealing ring.
Tightening torque: 11 42 1AZ
.
RA Removing and installing, sealing/replacing main flow oil filter (S65)
BMW AG - TIS
22.02.2013 10:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
