3 Series E90 M3 (S65) SAL
Unlock hose (2) for idle actuator incoming air at fastener (1) and
detach in direction of arrow.
Unlock hose (2) for condensate drain line at fastener (1) and
detach in direction of arrow.
Installation:
Each hose clamp on the decoupling element is exactly positioned.
Loosen hose clamps (1).
Secure hose clamps with special tool 00 9 250 .
Tightening torque: 11 61 1AZ
.
Note:
Picture shows hose clamps (1 to 3).
Release hose clamp (1) on cylinder 4.
Secure hose clamps with special tool 00 9 250 .
Tightening torque: 11 61 1AZ
.
RA Removing and installing air intake manifold (S65)
BMW AG - TIS
22.02.2013 10:48
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
