3 Series E90 M3 (S65) SAL
13 53 240
Replacing complete injection pipe (S65)
Special tools required:
•
11 5 210
•
13 5 281
Necessary preliminary tasks:
•
Read out fault memory of DME control unit; if necessary,
work through test schedules
•
Switch off ignition
•
Remove intake air manifold
Recycling
Fuel escapes when fuel line is detached. Catch and dispose
of escaping fuel.
Observe country-specific waste-disposal regulations.
Release screws (1).
Unclip fuel line (2).
Unlock plugs on fuel injectors and disconnect.
Unlock, disconnect and seal fuel line (3).
Remove injection pipe.
Seal openings for fuel injectors in throttle valve housings with
special tool 11 5 210 .
RA Replacing complete injection pipe (S65)
BMW AG - TIS
22.02.2013 11:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
