3 Series E90 M3 (S65) SAL
Clean contact face of brake caliper mounting bracket and apply a
thin coating of anti-squeak compound.
Refer to BMW Service Operating Fluids.
Note:
After completing work:
-
Fully depress brake pedal several times so that brake
pads contact brake discs.
-
When installing new brake pads at front and rear axles,
brake fluid level must be brought up to "MAX" marking.
-
Read and comply with notes on braking in new brake
discs / brake pads.
-
If necessary, when replacing pads, reset CBS display in
accordance with factory specification.
RA Removing and installing/replacing brake pads on both front disc brakes (N54 / M5
BMW AG - TIS
22.02.2013 14:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -