3 Series E91 320d (M47T2) TOUR
Release bolts and remove transmission.
Tightening torque 24 00 1AZ
.
Installation:
Bore (1) in driving disk must be accessible from opening on
engine oil pan.
Check that adapter sleeves (2...3) are correctly seated.
Replace damaged dowel sleeves.
Installation:
Rotate torque converter until bore in torque converter is flush with
bore in driving disk.
Flange automatic transmission to engine.
RA Removing and installing automatic transmission (6HP19Z) M47T2
BMW AG - TIS
22.01.2013 16:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
