3 Series E91 320d (M47T2) TOUR
Note:
Detaching recessed handle is shown on left side; proceed in same
way for detaching recessed handle on right side.
Lever out cover (1) and release screw on recessed handle (2)
underneath.
Release clips (1) on trims (2).
Feed out eyelet (3) and remove trim (2) towards bottom.
Installation:
If necessary, replace faulty clips (1).
Eyelet (3) for manual unlocking of rear lid must be accessible.
Replacement:
Replace clips (1).
Remove insulating mat (2) from old trim and insert in new trim.
RA Removing and installing/replacing panel for rear lid
BMW AG - TIS
22.01.2013 19:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
