3 Series E91 320d (M47T2) TOUR
51 71 200
Removing and installing / replacing seal on
rear door, left or right
Necessary preliminary tasks:
•
Follow repair instructions for bonded seals.
•
Remove cover on inside door window frame
•
Release door retainer from door pillar
Note:
The positioning of the seal must be established in six areas of the
rear door with positioning aids to be stuck on.
Positioning aids are included with new seals.
E90 only - Position of seal (3) on rear door:
Area (A) at distance (D) to door rabbet.
Area (B) at line (1) of positioning aids (2) to be stuck on (see following work steps).
Area (C) at distance (E) to door inner panel. Bond straight between positioning aid "C1"/"C4" / "D1"/"D4".
Clean bonding surfaces on paint with adhesive cleaner (sourcing reference: BMW Parts Service).
D= 2.8 mm
E = 55 ... 70 mm
E91 only - Position of seal (3) on rear door:
RA Removing and installing / replacing seal on rear door, left or right
BMW AG - TIS
22.01.2013 19:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -