3 Series E91 320d (M47T2) TOUR
-
Helper must hold glass slide/tilt sunroof to prevent it falling out.
-
Release screws (1) (during installation: fit shims)
-
Release screws (2) on and carefully lower slide/tilt sunroof.
Important!
Do not damage any surrounding parts when removing the glass slide/tilt sunroof.
-
Remove glass slide/tilt sunroof completely (through rear lid at rear).
Installation:
If necessary, remove fabric adhesive tape.
To stop grating noises, secure all screws (1) prior to installation
with plastic washers (2).
If the standard screws can no longer grip, use "repair screws"
(have larger threads).
Important!
Do not crush any cables when fitting the glass slide/tilt
sunroof.
Initialize glass slide/tilt sunroof.
Installation:
To align panorama sunroof to body-cutout, insert screws and tighten loosely.
Panorama sunroof must still be able to move in the body-cutout.
On account of leaks, panorama sunroof must be exactly aligned to body-cutout.
Insert special tool 54 1 110 into centering bores up to stop in panorama sunroof and body.
RA Removing and installing complete glass slide/tilt sunroof
BMW AG - TIS
22.01.2013 20:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -