3 Series E91 320d (M47T2) TOUR
Release screws (1). Tightening torque
63 12 3AZ
.
E92 M3:
Release screw (2). Tightening torque
63 12 7AZ
.
Release wiring harness fastener (3) on headlight arm.
Remove high-pressure line and wiring harness from headlight
arm.
Pull out headlight (4) slightly and disconnect associated plug
connection.
Remove headlamp (4) in direction of arrow.
Installation:
•
Observe gap dimensions
•
Adjust headlights
Replacement:
•
Release screws (1) (tightening torque 63 12 2AZ
) and
remove headlight arm (2) from headlight
•
Remove ignition unit/bulb for xenon headlight
•
Remove control unit for xenon headlights
•
Remove drive unit for adaptive headlight
•
If necessary, remove bulbs.
RA Removing and installing or replacing left headlight (adaptive headlight)
BMW AG - TIS
22.01.2013 21:35
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -