3 Series E91 320i (N43) TOUR
![background image](/bmw/3_Series_E91/320i_N43_TOUR/page-320011.png)
Release knurled screws (1) and remove special tool 21 2 190
from SAC clutch.
Important!
If special tool 21 2 190 cannot be removed from SAC
clutch,
proceed as follows:
-
Fit special tool 21 2 170 on SAC clutch and secure.
-
Screw in spindle up to diaphragm spring.
-
Screw in spindle approx. 1 turn over contact pressure of
diaphragm spring.
-
Remove special tool 21 2 190 from SAC clutch.
-
Remove special tools 21 2 170 and 21 2 190 from SAC
clutch.
Withdraw special tool 21 2 250 from clutch plate with aid of
accompanying screw (1).
Installing new SAC clutch:
RA Removing and installing/replacing clutch (SAC 228 N45/N46/N45T/N43/N46T)
BMW AG - TIS
24.01.2013 08:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -