3 Series E91 320i (N43) TOUR
22 32 050
Replacing cross-member for transmission
mounting (N43/N53)
Necessary preliminary tasks:
•
Remove rear underbody protection
•
Support transmission with lifter.
Remove plug (1) and cable from holders of transmission cross-
member.
Unfasten screws (1) and nuts (2).
Remove transmission cross-member.
Tightening torque 24 71 1AZ/2AZ
.
Note:
Illustration similar.
RA Replacing cross-member for transmission mounting (N43/N53)
BMW AG - TIS
24.01.2013 09:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -