3 Series E91 320i (N43) TOUR
Disconnect plug connection (1).
Release cable and connector from retaining plate (3).
Release screws (2).
Remove cover plate (4).
Tightening torque:24 00 4AZ
Release screws (1) and screws (2) and remove bracket (3).
Grip clamping sleeve (1).
Slacken nut (2).
Detach retainer (3) downwards using a screwdriver.
Pull cable (4) out of holder.
Installation:
Adjust selector lever
Supporting transmission:
With special tools 23 4 050 , 23 0 132 and 00 2 030
Support transmission from underneath.
Secure transmission with tensioning strap (1).
Tasks are described in Transmission bracket.
After completion of work, check transmission oil level.
RA Removing and installing automatic transmission (6HP19Z) N43
BMW AG - TIS
24.01.2013 09:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -