3 Series E91 320i (N43) TOUR
![background image](/bmw/3_Series_E91/320i_N43_TOUR/page-412001.png)
31 11 004
Removing and installing/replacing
reinforcement brace
Important!
Observe safety instructions for raising the vehicle
Driving without the reinforcement brace is not permitted!
Necessary preliminary tasks:
•
Remove front assembly underside protection
•
Remove reinforcement cover on left and right
Partly detach underbody panelling on left and right in area of
reinforcement brace
Release screws (1).
Remove reinforcement brace (2).
Installation:
Replace screws and insertion nuts.
Tightening torque 31 10 2AZ
.
RA Removing and installing/replacing reinforcement brace
BMW AG - TIS
24.01.2013 09:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -