3 Series E91 320i (N43) TOUR
Important!
Cut outer metal sheet only.
Dimension a = approx. 30 mm from 10 mm dia. bore.
Open weld joints in areas (2).
Installation:
Weld in reinforcement plate at severance cut.
Mark severance cut (1) in accordance with measurement and cut.
Important!
Cut outer metal sheet only.
Measurement a = approx. 30 mm from lock striker reinforcement.
Open weld joints in areas (2).
Installation:
Apply window glass adhesive to cavity acoustic baffle (3).
RA Replacing rear left outer wheel arch section (rear left side panel removed)
BMW AG - TIS
24.01.2013 11:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -