3 Series E91 320i (N43) TOUR
Installation:
Install rear window (1) and fix in place with nuts (2).
Check gap dimensions of rear window.
If necessary, adjust rear window.
Tightening torque 51 31 1AZ
.
Replacement (51 31 221 and 51 31 231):
Note:
The following assembly work steps are dependent on the vehicle
equipment specification and must be adapted accordingly.
For this reason, the required work steps may differ from the work
steps shown here.
•
Remove aerial/antenna amplifier
•
Remove pivot bearing for rear window wiper
•
If necessary, modify retaining elements on rear spoiler
Warning!
In event of broken rear window:
Remove all glass splinters, also from underneath seats.
Check seat belts:
-
Condition of seatbelt strap
-
Function of reel mechanism
-
Belt interlock
-
Belt buckle
RA Removing and installing/replacing rear window
BMW AG - TIS
24.01.2013 13:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -