3 Series E91 320i (N43) TOUR
Rear floating roofliner:
Close floating roofliner.
Release screws (1).
Tightening torque 54 12 05AZ
.
Installation:
Replace microencapsulated screws.
Remove tensioning springs (left side only) and shims.
Slide floating roofliner (4) in direction of arrow (1) between outer
body skin and roofliner.
Slide floating roofliner (4) up to end of control rail (3).
Raise floating roofliner (4) and remove over control rail (3) in
direction of arrow (2).
Important!
Slider set can fall sideways out of guide rail.
Risk of damage to drag arm.
Secure slider set or if necessary remove.
Installation:
Tensioning springs (1) must rest correctly in recess of rear floating roofliner (2).
Left side: make sure washer (4) is correctly positioned with turning lock.
RA Removing and installing/replacing both floating roofliners for glass slide/tilt
BMW AG - TIS
24.01.2013 15:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -