3 Series E91 320i (N43) TOUR
Unscrew nuts (1).
Remove holder for telematics control unit / SES (2) in
direction of arrow from body.
E88:
Raise panel for luggage compartment partition (4) slightly and
feed out holder for telematics control unit / SES (2) in direction
of luggage compartment.
Release wiring harness fastener (3) from holder
for telematics control unit / SES (2).
Installation:
Make sure guides (5) are correctly seated in associated body
holders.
Make sure wiring harness is correctly laid.
Disconnect plug connection (1).
Release all nuts.
Remove hands-free charging electronics (3) from holder
for telematics control unit / SES (2).
Replacement:
•
Carry out vehicle programming/coding
•
If necessary, log mobile phone on to vehicle
RA Removing and installing (replacing) hands-free charging electronics (High)
BMW AG - TIS
24.01.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -