3 Series E91 320i (N43) TOUR
65 77 541
Removing and installing/replacing front left or
right acceleration sensor
Note:
Acceleration sensor only fitted in US version!
Unlock plastic fasteners (1) by turning counterclockwise through
180
°
.
Feed flap (2) in direction of arrow out of front wheel arch
cover (3) and remove.
Release screws (1) and remove acceleration sensor (2).
Disconnect plug connection (3).
Installation:
Replace screws (1).
Tightening torque 65 77 9AZ
.
RA Removing and installing/replacing front left or right acceleration sensor
BMW AG - TIS
24.01.2013 17:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -