3 Series E91 320i (N43) TOUR
> E70
The ultrasonic interior motion sensor is integrated in the FZD control unit.
> E81, E87, E90, E92 and E91 without Panorama glass roof
The ultrasonic interior motion sensor is integrated in the rear interior light.
> E91 with Panorama glass sunroof
The ultrasonic interior motion sensor is installed at the FZD control unit.
-
Selector lever or shift lever in the centre console
If reverse gear is engaged, the electrochromic mirrors will not be dimmed.
-
Power supply from the distributor in the junction box
The roof control panel draws its power supply from the distributor in the junction box.
> E81, E87, E90, E91 E92
3 positive cables connect the distributor in the junction box to the roof control panel:
-
Terminal 15
-
Terminal 30
-
Terminal 30g, not E91 with option 402 "Panorama glass roof"
> E93
2 positive cables connect the distributor in the junction box to the roof control panel:
-
Terminal 15
-
Terminal 30
> E70
3 positive wires lead from the power distributor in the junction box and from the rear power distributor to the roof
control panel:
-
Terminal 15 from rear power distributor
-
Terminal 30g
•
with option 402 "Panorama glass roof" from rear power distributor,
•
without option 402 "Panorama glass roof" from power distributor in the junction box,
-
Terminal 30 from power distributor in the junction box
The junction box houses a distributor and a control unit. The control unit is called the junction box electronics.
The junction box electronics (JBE control unit) is the data interface for the following data buses:
-
K-CAN (body CAN)
-
PT-CAN (powertrain CAN)
-
Diagnosis wire
The signals from the F-CAN (Chassis CAN) are simply looped through the junction box. This means that the
signals from the F-CAN are not received and processed by the JBE control unit. The F-CAN cables are simply
routed through the junction box housing.
[for further information, please refer to SI Technology (SBT) 61 05 04 095]
The following control units are associated with the FZD control unit (depending on the equipment):
-
CAS: Car Access System
The CAS (Car Access System) control unit supplies the terminal status Terminal R ON.
The CAS control unit is connected to the FZD control unit via the K-CAN.
SBT Roof control panel E70, E81, E87, E90, E91, E92, E93
BMW AG - TIS
24.01.2013 22:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -