3 Series E91 323i (N52) TOUR
Illustrations show E87.
Lower transmission and lock with a suitable block (1) between
steering and oil sump.
•
Unlock and disconnect plug (1) by turning.
•
Do not touch pins.
•
Release cable from retainers.
•
Insert special tool 24 2 390 in sealing sleeve.
Operations are described in
Notes on mechatronics
Important!
Read and comply with important note.
Release screws.
Installation:
Observe screw fastening sequence without fail.
Tightening torque, steel screws 24 00 1AZ
.
Aluminium screws/bolts must be replaced.
Tightening torque and angle of rotation, aluminium screws/bolts
24 00 2AZ
.
Installation:
Tighten down screws/bolts to specified torque.
Secure special angle of rotation tool 00 9 120 with magnet
00 9 130
to underbody and screw down blue aluminium screws/bolts in
accordance with angle of rotation.
Angle of rotation 24 00 2AZ
.
RA Removing and installing automatic transmission (6HP19Z) N52/N52K/N53
BMW AG - TIS
27.01.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
