3 Series E91 323i (N52) TOUR
34 00 009
Checking brakes on test stand
Necessary preliminary tasks:
•
Check tires for damage
•
Check tyre treads
•
Check tyre pressure
Important!
The corresponding system must be deactivated on vehicles
equipped with ASC+T or DSC.
The ASC+T or DSC telltale and warning light must light up in
the instrument cluster!
The brakes must be at normal operating temperature. To do so,
gently warm up the brake disks and brake drums while dry by
braking the vehicle several times.
Important!
Only brake test stands (analyzers) with test speeds of 2.5-
6 km/h may be used.
You must follow without fail the guidelines contained in the
operating instructions of the relevant test stand manufacturer.
Failure to do so may result in damage to the vehicle and the
system and also personal injury.
RA Checking brakes on test stand
BMW AG - TIS
27.01.2013 23:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -