3 Series E91 323i (N52) TOUR
34 52 525
Replacing one front pulse generator
Note:
Read and comply with General Information.
Open plug housing (1), pull plug connection (2) out of bracket
and disconnect.
Pull cable with rubber grommet out of holders (3).
Installation:
Ensure proper locking of plug connector and proper seating of
rubber grommets.
Release hexagon socket head cap screw (1) and pull wheel
speed sensor (2) out of bore.
Installation:
Tightening torque 34 51 4AZ
.
Clean bore for pulse generator and lubricate with Staburags NBU
12/K grease.
RA Replacing one front pulse generator
BMW AG - TIS
28.01.2013 00:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -