3 Series E91 325d (M57T2) TOUR
Slide optical fibre (1) into stripping device (2) until flush at
point (3).
Close pliers (4) fully.
Close clamping lever (5) in direction of arrow.
Open pliers (4) by one tooth notch.
Open clamping lever (5) against direction of arrow again and
remove optical fibre (1).
Note:
A stripping replacement blade set is available under
number 61 4 327.
Cutting optical fibre to length
Important!
The cutting blade must be replaced prior to each cutting of the
optical fibre.
Pull pin (1) in direction of arrow.
Fold up blade retaining link (2) in direction of arrow.
Warning!
Risk of injury when changing the blade.
RA Cutting off, stripping insulation and cutting optical fibres to length
BMW AG - TIS
03.02.2013 16:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -