3 Series E91 325i (N52K) TOUR
51 47 030
Removing and installing/replacing rear
(inside) left or right entrance cover strip
Special tools required:
•
00 9 317
Necessary preliminary tasks:
•
Remove rear seat
Release expansion rivet (1).
Unclip clips (2) on entrance cover strip (3) with special tool
00 9 317 .
Remove entrance cover strip (3) towards top.
Installation:
If necessary, replace faulty clips (1).
Fit entrance cover strip (2) with preinstalled clips (1).
RA Removing and installing/replacing rear (inside) left or right entrance cover str
BMW AG - TIS
06.02.2013 20:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -