3 Series E91 325i (N52K) TOUR
72 11 030
Removing and installing/replacing front left or
right seat belt
Necessary preliminary tasks:
•
Remove panel for door post
Move backrest to full rearward position.
Unclip release tab (2) for belt anchor fitting trim (1) with plastic
wedge.
Release screw (1).
Tightening torque 72 11 2AZ
.
Remove anchor fitting (2).
Installation:
Make sure anchor fitting is correctly seated on seat mechanism
pin.
Release screws (1).
Tightening torque 72 11 4AZ
.
Remove deflector bar (2).
Unscrew bolt (3).
Tightening torque 72 11 3AZ
.
Set down belt deflector with belt (4).
RA Removing and installing/replacing front left or right seat belt
BMW AG - TIS
07.02.2013 05:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -