3 Series E91 330i (N52) TOUR
5.
Keep special tools dry, clean and (down to the spindle)
free from grease.
6.
Impact screwdrivers are prohibited!
7.
Do not compress coil spring to full extent.
Necessary preliminary tasks:
•
Remove front spring strut
Release nut (1), remove holder (2) and remove screw (3).
Expand swivel bearing with special tool 31 2 230 and detach
from spring strut.
Installation:
Keep press fit of swivel bearing and spring strut in lower area
clean and free from oil and grease.
Screw head must point in direction of travel.
Replace self-locking nut.
Tightening torque 31 31 3AZ
.
Installation:
Expand swivel bearing with special tool 31 2 230 , align by way
of gap to positioning pins (1) on back of spring strut and press
together up to stop.
RA Replacing front left or right spring strut shock absorber
BMW AG - TIS
17.02.2013 23:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -