3 Series E91 330i (N52) TOUR
41 11 028
Replacing left engine carrier (partial
replacement before front axle)
Read contents of Body, General.
For stripping and rigging operations, refer to texts on KSD
CD (FR number 41 11 028).
Remove or cover those vehicle components in the repair area
which are susceptible to heat or dust.
Place vehicle on straightening bench.
Following new body parts are required (refer to EPC):
-
(1) Partial section, engine carrier
Mark severance cut (1) in middle of 20 mm dia. bore and cut.
Preparation of new part:
Mark severance cut (1) in accordance with vehicle and cut.
Installation:
Adjust all new parts to fit with straightening attachment or
universal mount.
Weld in reinforcement plate at severance cut.
Preparation of new part:
Open weld joints in areas (1).
Take off holder.
RA Replacing left engine carrier (partial replacement before front axle)
BMW AG - TIS
18.02.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -