3 Series E91 335i (N54) TOUR
Undo screws (1 and 2)
Tightening torque: 11 53 3AZ
.
Release coolant feed lines (3 and 4) if necessary with suitable
pliers.
Important!
Do not position pliers on pipes - risk of damage!.
Release screws (1).
Tightening torque: 11 53 9AZ
.
Remove feed line (2).
Installation:
Replace O-ring.
Release screw (1).
Tightening torque: 11 53 6AZ
.
Release coolant return pipe at connection (2) if necessary with
suitable pliers.
Release screw (3).
Tightening torque: 11 53 8AZ
.
Release coolant return pipe at connection (4) if necessary with
suitable pliers.
Unfasten coolant return pipe.
Important!
Do not position pliers on pipes - risk of damage!.
Release screws (1).
Tightening torque: 11 65 2AZ
.
Remove retaining plate (2).
Release screws (3).
Tightening torque: 11 65 2AZ
.
RA Removing and installing/replacing exhaust-gas turbocharger for cylinders 1-3 (N5
BMW AG - TIS
23.02.2013 03:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
