3 Series E91 335i (N54) TOUR
Adjust rear lid at striker until negative rear lid protrusion (A) is
obtained on left and right.
A = 1.0 to 1.5 mm
Note:
Bump stops must not strike against rear lid in the process.
Sum total of negative rear lid depressions (A) on left and right
must be between 2 and 3 mm.
Tighten down screws (1).
Tightening torque 51 24 2AZ
.
Unscrew bump stops (2) on left/right until rear lid is flush with
side panel (negative rear lid protrusion 0 mm).
Fit protective cap (1) on left/right.
Check closing comfort, repeat adjustment if necessary.
RA Adjusting rear lid lock
BMW AG - TIS
23.02.2013 12:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -