3 Series E91 335i (N54) TOUR
51 71 000
Removing and installing / replacing seal on
front door, left or right
Necessary preliminary tasks:
•
Follow repair instructions for bonded seals.
•
Remove cover on inside door window frame
•
Release door retainer from door pillar
Note:
The positioning of the seal must be established in three areas of
the front door with positioning aids to be stuck on.
Positioning aids are included with new seals.
Position of seal (3) on front door:
Area (A) at distance (G) to door rabbet.
Area (B) at line (1) of positioning aids (2) to be stuck on (see following work steps).
Area (C) at distance (E) to door inner panel.
Area (D) at distance (F) to door fold.
Clean bonding surfaces on paint with adhesive cleaner (sourcing reference: BMW Parts Service).
E = 57 mm
F = 4 mm
G = 2.8 mm
RA Removing and installing / replacing seal on front door, left or right
BMW AG - TIS
23.02.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -