3 Series E91 335i (N54) TOUR
Turn sleeve (1) with a suitable tool (e.g. pointed pliers) approx.
45
°
in direction of arrow and pull out of receptacle (2).
Installation:
Slide sleeve (1) over locking pin (2).
Make sure sleeve (1) is correctly engaged in cover housing (3).
Replacement:
Release screws (1).
Disengage emergency actuation pull strap (2) from retainer (5)
and remove towards front.
If necessary, unclip locking pin (3) in direction of arrow on
servodrive (4).
RA Removing and installing / replacing servodrive for tank filler flap
BMW AG - TIS
23.02.2013 18:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -