3 Series E92 316i (N43) COUPE
Check guide sleeves (1) for damage and correct seating.
Replace nozzles (1).
Note:
Clean sealing faces (2) with special tool 11 4 470 only.
Install crankshaft (2).
Installation:
Checking crankshaft main bearing clearance:
Place special tool 00 2 590 (Plastigage type PG1) on oil-free
crankshaft.
Do not twist crankshaft.
Installation:
To check main bearing clearance, use used screws.
There must be no oil in the blind holes (risk of cracking).
Note:
Wash and oil screws.
Insert screws (2).
RA Replacing all main crankshaft bearing shells (N43B16)
BMW AG - TIS
20.01.2013 09:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
