3 Series E92 316i (N43) COUPE
Warning!
Protective goggles must be worn when working on the
gudgeon pin circlip.
Warning!
Protective goggles must be worn.
Important!
Piston and gudgeon pins are paired and must not be fitted
individually.
Lever out circlip with special tool 11 4 492 and press out
gudgeon pin.
If necessary, replace connecting rods.
Important!
Conrods are only available as a set.
Do not fit mixed combinations of old and new conrods (risk of
damage).
Note:
The gudgeon pin must be able to be pressed through the liner by
hand with little force and must not display any significant play.
Prior to installation, measure piston installation clearance:
Measure piston diameter with micrometer at measuring point A
from lower edge of piston and offset by 90
°
to piston pin axis.
Measuring point A .
RA Removing and installing/replacing all pistons (N43)
BMW AG - TIS
20.01.2013 09:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -