3 Series E92 316i (N43) COUPE
11 41 005
Removing and installing/replacing chain
tensioner for oil pump drive (N43B16)
Special tools required:
•
11 3 340
•
11 5 120
•
11 8 690
Important!
Balancing shafts must be readjusted after installation of chain
tensioner.
Necessary preliminary tasks:
•
Remove vibration damper.
•
Remove oil sump.
•
Remove cylinder head cover.
Crank engine at central bolt and secure flywheel with special tool
11 5 120 in firing TDC position of cylinder no. 1.
RA Removing and installing/replacing chain tensioner for oil pump drive (N43B16)
BMW AG - TIS
20.01.2013 10:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -